The Honeywell controls have been used by Middleby on all of their conveyor ovens. The UDC control (rubber face) has been used by Middleby for over 10 years and is still being built as a custom control by Honeywell. We have been selling this control for over 5 years with no unsatisfied customer returns. Our control is plug-in compatible to both Middleby's latest control  and the older Middleby controls.  The Middleby (Honeywell) control lists for around $900 (the price for this control changes often). The next choice is the Honeywell  UDC control (that we sell) at less than half the price.  If your primary concern is price, we have rebuilt over 450 controls (over the last 15 years) and can rebuild your control for around $200. The rebuilt control includes a one year warranty and allows you to keep your original control.

We also have the modulating valve version built for the newer 570 ovens equipped with a modulating valve (rare).

Honeywell UDC Control used by Middleby for over 10 Years and is being built for us as a custom control by Honeywell.

Original Middleby UDC Control

Low price control built for us by a U.S. manufacture.

Rebuilt Middleby ( Honeywell Control )

• Loosen screw on front of control.
• Slide out old control.
• Slide in new control.
• Tighten screw.

• Loosen screw on front of control.
• Slide out old control.
• Slide in new control.
• Tighten screw.

Middleby Techs may not work on your oven when they see a retrofit part.

• Loosen screw on front of control.
• Slide out old control.
• Slide in new control.
• Tighten screw.

When oven fails (in a dual deck oven),  the problem can be localized to the controller, by swapping controls from one oven to the other (1 to 2 minute total time).

When oven fails (in a dual deck oven),  the problem can be localized to the controller, by swapping controls from one oven to the other (1 to 2 minute total time).

.

When oven fails (in a dual deck oven),  the problem can be localized to the controller, by swap controls from one oven to the other (1 to 2 minute total time).

$100+

Requires new wiring

Middleby's operator manual no longer matches control.

Lowers resale value of oven.

Middleby Techs may no longer work on the oven.

Huge Savings - Call for price (See bottom of page for number)

 $700 - $960

For more information, select the products tab at the top of the page.

Honeywell reliability is not important. You have a spare oven to get you through an oven failure on a Saturday night.

The resale value of the oven is not a concern.

Factory service will never be required.

Training users to a new control is not an issue.

Not recommended for service organizations, since the dual display may generate nuisance service calls (user will question any difference between actual temperature and the set-point).

For more information, select the service tab at the top of the page.