logo

Cybernetics Tech Industries

Electronic Controls for Restaurant Equipment
 

CTI Pizza Oven Speed Control  - Replaces  Middleby# 64149, 37337 and 60542.  Factory presets for all popular ovens.  Manual adjust mode for nearly any conveyor application.

 

 

digital motor speed control

We designed the CTI Speed control to be the most robust, bullet proof motor controller available. The design of this oven control was a culmination of:  design requirements,  feedback from oven rebuilders and lessons learned from rebuilding over 500 controls.  The CTI conveyor control cannot be damaged from failures of other oven components or even serious abuse (when wired properly). The control monitors for over current, ambient temperature, speed sensor problems, bad sensor wiring, failure of the user interface, locked motor rotor and even bad motor brushes.  The CTI-M-DigSpd motor speed control has been in production for 15+ years. We feel this is the most robust oven control for pizza ovens in the market. The diagnostic capabilities aid in solving oven conveyor problems; no blind swapping and no guessing of the cause of the conveyor failure.The control was designed and is still built by our staff at Cybernetics Tech Industries. Our lead Engineer has over 30 years experience as an Engineer in both hardware and software (former Engineer for NASA Avionics research contracts). 

Replaces:

 ®Middleby Marshall  31020
 ®Middleby Marshall  37337
 ®Middleby Marshall  45133
 ®Middleby Marshall  28074-0004
 ®Middleby Marshall 28074-0012
 ®Middleby Marshall  28074-00180
 ®Middleby Marshall  42810-0133
 ®Middleby Marshall  58323
 ®Middleby Marshall  64149
 ®Dart Micro Drive - See Blodgett adaptor
 There will be more soon ......

Specifications:

  Product ID: CTI-M-DigSpd
  Description: DC Motor Speed control
  Motor Voltage: 90 or 130 V DC
  Motor HP: 1/50 to 1/8HP
  Price: $275


Features:

Digital Speed Controller Replacement for 64149


Preloaded speed settings for Middleby ovens - Manual adjustment mode for non-middleby conveyor ovens  Download the Manual-Mode Instructions (PDF)

Smart Control: Displays existing errors and previous errors!

Bullet Proof Design

  1. Over current and stall protection. Speed control protects its own electronics and also the mechanical drive system in the oven..
  2. Short circuit on motor terminals (bad motor) will not damage control.
  3. Short circuit on speed sensor will not damage control.
  4. Lead reversal on speed sensor will not damage control or sensor.
  5. Short circuit (liquid) in or on the display, will not damage control or display.
  6. Temperature monitor - Warns of over temp condition
  7. Soft Start & Torque sense/limit circuit will greatly reduces damage to conveyor belt and motor gearbox (from conveyor jams)

Built-in error logging, diagnostics and status display.

  1. Over current shutdown
  2. Bad speed sensor diagnostics
  3. CTI Test mode for conveyor system & motor health
  4. Display mode for axial fans efficiency & health - Access control compartment ambient temperature with a press of a button
  5. Error Logging of last error - allows for remote diagnosis (over the phone). Fix oven on first trip.
  6. Manual adjustment mode allows calibration of the time display for  use in non Middleby conveyor ovens.
  7. Motor brush test has been implemented  for 2018
  8. Engineered and built in the USA by Cybernetics Tech Industries(CTI)
  9. In production since 2003 (15 years)

Call and talk to the design engineer. We can help you solve any conveyor/motor/speed problem